Degreasing method for oxygen pipelines

Odmašťování kyslíkových potrubí

Everyone knows that oxygen pipelines should avoid oil and be degreased. Today we will introduce the degreasing method for oxygen pipelines. Degreasing, as the name suggests, means removing oil stains from the inner and outer surfaces of pipes. Degreasing is a key process in the construction of oxygen pipelines. Once oil contamination is inside the […]

 
Přečtěte si více
Návrh napětí petrochemického potrubí

Návrh napětí petrochemického potrubí

In the current offshore oil engineering, pipeline design has become an important link, and the quality of pipeline design determines the success or failure of the offshore petrochemical engineering. Therefore, under this background, we should fully realize the importance of pipeline design in offshore oil engineering, and fully realize the impact of stress conditions on […]

 
Přečtěte si více

Proces svařování superduplexní desky z nerezové oceli S32750

Using the combined welding method of GTAW+GMAW-P, the transverse and vertical welding positions of the 12 mm thick S32750 super duplex stainless steel plate were tested. The selection of welding methods, materials, grooves, process parameters, as well as the cleaning, preheating and interpass temperature control before welding were introduced in detail. After welding, tensile test, […]

 
Přečtěte si více
What is piping heat tracing?

What is piping heat tracing?

What is piping heat tracing? Pipeline heat tracing is a kind of constant temperature or heating method to prevent the material in the pipeline from crystallizing and solidifying or to meet the process demand, and to keep the material at a certain temperature. Electric heat tracing system is the use of electrical energy into heat […]

 
Přečtěte si více

Storage and transportation of steel materials

Pick the best places, warehouses The places, warehouses to keep steel materials needs to be cleaned, easy for drainage, from the factories and mines that generate harmful gases or dust. Be sure to remove every one of the debris, weeds to keep the steel clean. Inside the warehouse, salt, cement, and materials that may corrode […]

 
Přečtěte si více
Installation guide of oil and gas pipeline

Installation guide of oil and gas pipeline

What are the general requirements for equipment layout design? Meet the requirements of the process flow, and the disposition of equipment should be in the order of logistics. The fire separation distance among equipment, buildings and structures should be in accordance with the requirements for production safety and environmental protection. The installation of oil and […]

 
Přečtěte si více