Degreasing method for oxygen pipelines

산소 파이프 라인의 탈지

Everyone knows that oxygen pipelines should avoid oil and be degreased. Today we will introduce the degreasing method for oxygen pipelines. Degreasing, as the name suggests, means removing oil stains from the inner and outer surfaces of pipes. Degreasing is a key process in the construction of oxygen pipelines. Once oil contamination is inside the […]

 
자세히 보기
대구경 탄소강 파이프의 열처리 작업 지침

대구경 탄소강 파이프의 열처리 작업 지침

1. Scope of construction XX power plant 1×135MW project, drop pipe, collector butt material are carbon steel, specifications are: φ426×40, φ325×35 and φ273×40. This operation guideline is applicable to the preheating and post-welding heat treatment construction of carbon steel large diameter pipe welds, as well as to the heat treatment of its reworked welds. The […]

 
자세히 보기
석유화학 파이프라인의 응력 설계

석유화학 파이프라인의 응력 설계

In the current offshore oil engineering, pipeline design has become an important link, and the quality of pipeline design determines the success or failure of the offshore petrochemical engineering. Therefore, under this background, we should fully realize the importance of pipeline design in offshore oil engineering, and fully realize the impact of stress conditions on […]

 
자세히 보기
화학 공정 파이프라인용 증기 추적 파이프 설계

화학 공정 파이프라인용 증기 추적 파이프 설계

The heat tracing design of pipeline plays an important role in real life. In the design, scientific and technical personnel need to determine the heat tracing coefficient and design quota based on the actual situation, so as to ensure that the heat tracing pipeline design meets the actual production requirements and meet the actual production […]

 
자세히 보기

S32750 슈퍼 듀플렉스 스테인리스 강판의 용접 공정

Using the combined welding method of GTAW+GMAW-P, the transverse and vertical welding positions of the 12 mm thick S32750 super duplex stainless steel plate were tested. The selection of welding methods, materials, grooves, process parameters, as well as the cleaning, preheating and interpass temperature control before welding were introduced in detail. After welding, tensile test, […]

 
자세히 보기
高壓管道

도시 및 마을의 고압 및 아압압 가스 파이프라인 선정

There are many kinds of pipelines used to transport gas, which must be determined according to the service conditions (design pressure, temperature, medium characteristics, area of use, etc.) of gas, welding performance of data and other factors after technical and economic comparison [1,2]. 1. Determination of steel grades of high pressure and sub high pressure […]

 
자세히 보기
파이핑 열 추적이란 무엇인가요?

파이핑 열 추적이란 무엇인가요?

What is piping heat tracing? Pipeline heat tracing is a kind of constant temperature or heating method to prevent the material in the pipeline from crystallizing and solidifying or to meet the process demand, and to keep the material at a certain temperature. Electric heat tracing system is the use of electrical energy into heat […]

 
자세히 보기

Storage and transportation of steel materials

Pick the best places, warehouses The places, warehouses to keep steel materials needs to be cleaned, easy for drainage, from the factories and mines that generate harmful gases or dust. Be sure to remove every one of the debris, weeds to keep the steel clean. Inside the warehouse, salt, cement, and materials that may corrode […]

 
자세히 보기
Installation guide of oil and gas pipeline

Installation guide of oil and gas pipeline

What are the general requirements for equipment layout design? Meet the requirements of the process flow, and the disposition of equipment should be in the order of logistics. The fire separation distance among equipment, buildings and structures should be in accordance with the requirements for production safety and environmental protection. The installation of oil and […]

 
자세히 보기