The difference between pipe nipple and pipe coupling

The difference between pipe nipple and pipe coupling What is a pipe nipple? Pipe nipple is a length of straight pipe with male threads on both ends. It is one of the most popular category of pipe fittings. It is a connector or a coupling threaded on both ends. Pipe nipples are used to allow […]

 
Read More

The production process of stainless steel pipe bend

The production process of stainless steel pipe bend According to the different manufacturing methods, the stainless steel pipe bend can be divided into three types, namely, the bending pipe, the punching pipe and the welded pipe. Which can be divided into two types of bending bending and bending. When the stainless steel tube for bending the pipe […]

 
Read More
What is Pipe fitting

What is Pipe fitting?

What is Pipe fitting? Pipe fitting is the operation of repairing or installing tubing or piping systems which convey gas, liquid, and solid materials occasionally. It also involves selecting and preparing tubing or pipe, joining it by several means and location and repairs of leaks. Fitters work with various tubing and pipe materials such as […]

 
Read More
What are pipefittings?

What are pipefittings?

What are pipefittings? Pipefittings are general terms for components in the piping system that function as connection, control, direction change, split, seal, and support. According to the different processing methods, it is divided into four categories, namely, butt welding pipe fittings (both welded and non-welded), socket welding pipe fittings and threaded pipe fittings and flanged pipe […]

 
Read More

What is a Heat Exchanger

Heat Exchanger is a unit through which heat is transferred from one fluid to another. The solution in the Heat Exchanger can be separated by preventing the direct contact of the liquids. The internal combustion engine is a good example of the Heat Exchanger as it regulates the coolant through radiator coils. Parallel flow, cross […]

 
Read More

Heat Exchangers Design

Heat Exchangers Design For an engineer and designer heat transfer equipments are the most important equipments or the devices which he comes through during his career, for that a good theoretical knowledge on the concept of heat transfer is required and well ideology on the equipment selection, it working principle will help to design for […]

 
Read More

What is casing coupling?

Casing Coupling is the joining of two short length pipes by the means of male and female threads. All types of casing couplings have internal threads which are known as female thread forms. These thread forms are usually machined so that they can be coupled with the external threads on pipes known as male thread […]

 
Read More

What is return bend?

Return Bend is a type of pipe fitting that changes the direction of passing fluid by 180 degrees. It is u-shaped and made up of two L-bends. The fitting can be mold or cast as per the requirements of the existing pipe. As it is widely used by plumbing supplies thus it is available in […]

 
Read More

What is reducing tee?

What is reducing tee? A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run. Before buying a Reducing Tee, […]

 
Read More

What is reducing elbow

Reducing Elbow is a kind of elbow setting that provides a change in the material flow and joins two pieces of different pipes or tubes. It helps the system to avoid pressure losses due to re-acceleration and friction. It is named so as it designed like an elbow. It has different sized openings depending on […]

 
Read More