A reducing flange consists of a flange with one specified diameter having a bore of a different and smaller, diameter. Except for the bore and hub dimensions, the flange will have dimensions of the larger pipe size.

Reducing flange is designed for when there is a change in the pipe size. The predominate flange (dimensions) matching the larger pipe size (NPT) but having a smaller bore matching the smaller pipe size (NPT). These flanges normally come in blind, slip-on, threaded and weld neck flanges. They are available in all pressure classes and provide a good alternative to connecting two different sizes of pipe. This type of flange should not be used if an abrupt transition would create unwanted turbulence, such as at a pump.
Reducing Flanges

Designed for use in changing diameters in a piping system. A reducing flange consists of a flange with one specified diameter having a bore of a different and smaller, diameter

Except for the bore and hub dimensions, the flange will have dimensions of the larger pipe size. Reducing flanges are normally provided as one of three types:

  • Welding Neck flange
  • Slip-On flange
  • Threaded flange
Uses of Reducing Flanges:
  • Reducing flanges are used in pipe-to-pipe connections.
  • Reducing flanges are a little easier to bolt up than non-reducing flanges.
  • They provide the most perfect solution when you need to connect different size flanges.
  • These flanges are available in all types and pressures.
  • Reducing flanges are fixed by welding, gluing or clamping flanges of equal dimensions provided with different connecting pieces.
  • They offer the simplest and least expensive method of mating two different sized flanges.
Standards, Dimensions & Weight
  • 300# Slip-On Orifice Flange
  • 300# Weld Neck Orifice Flange
  • 600# Weld Neck Orifice (raised face and RTJ ring type joint) Flange
  • 900# Weld Neck Orifice (raised face and RTJ ring type joint) Flange
  • 1500# Weld Neck Orifice (raised face and RTJ ring type joint) Flange
  • 2500# Weld Neck Orifice (raised face and RTJ ring type joint) Flange
Reducer flange draws :
weld neck flange and reducing slip-on flange
Weld neck flange and 
reducing slip-on flange
reducing slip-on flange
reducing slip-on flange
reducing weld neck flange
+ reducing weld neck flange

Size: 1/2” to 60”, DN 12mm to DN 1500mm 
Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250
Facing: RF / RTJ

Material:

Cabon steel: A105, A350 LF2
Stainless steel: A182 F304/F304L/F316/F316L/F321
Alloy steel: F11, F12
Packing: plywood case and plywood pallet

Leave a Reply

Your email address will not be published. Required fields are marked *